STANDARD FEATURES
- Valmex® Mainstream plus PVC tube fabric
- Welded seams
- Flush mount non-return valves
- High tensile chromated & powder coated aluminum hull
- Self-draining deck
- Removable seat (1)
- Lifting points and towing eyes
- Tow bridle points
- Anti-slip deck
- Rubbing strake
- Full length keel guard
- Under seat bag
- Highfield dry bag
- Foot pump, oars, repair kit
OPTIONAL EQUIPMENT
- ORCA® Hypalon tube fabric
- Dinghy wheels
SPECIFICATIONS
| Overall Length | 2.39 m | 7' 10" |
| Internal Length | 1.56 m | 5' 1" |
| Overall Width | 1.53 m | 5' 0" |
| Internal Width | 0.75 m | 2' 5" |
| Dead Rise | 10.5° | |
| Tube Diameter | 44 cm | 15" |
| Number of Air Chambers | 3 | |
| Maximum Load | 290 kg | 639 lb |
| Maximum People | 3 | |
| Boat Only Weight | 29 kg | 64 lb |
| Recommended Power | 2.5 hp | |
| Maximum Power | 4 hp | |
| Max Engine Weight | 22 kg | 49 lbs |
| Engine Shaft | S | |
| Design Category | C |
Because weight does matter, this single deck dinghy has been conceived keeping that motto in mind.
Their light weight make them a real alternative for those who may have chosen a soft bottom tender in the past but would prefer a hard hull for its performance. Ultralite tenders are roomy and strong, yet light and easy to transport. These little boats can be launched and recovered by a single man and are easy to be transported on a roof rack.
You will be impressed by their obvious quality level. The excellence of the finish only compares the detail of the ergonomics. The simple layout is combined with an uncluttered design and numerous standard accessories complete the picture.
The Ultralite’s are made of 2.5mm thick powder coated marine grade aluminium for the hull and 1100 Dtex fabric for the inflatable tube.