Johnson Hardware Pin Style Quick Release Lever
This fitting is rugged, having an ultimate strength of 2,500 lbs. A positive stop is provided to prevent jamming fingers between fitting and wire when thrown open under load. The large surface area of the push pad makes it easier to close the lever under load. Lever take-up is 2-1/8" to an over-center position and comes with a quick-release pin for positive locking. The extender arm is available in either 1/4" or 5/16" pin size. This is an essential piece of hardware on Catamaran shrouds to allow the crew to right the boat after a capsize. Without it, another boat or extraordinary effort is required. Trailerable boats up to 26 feet find that a lever on the forestay greatly facilitates stepping and unstepping the mast. 14-205: Pin to Pin range = 7-3/8" to 8-3/8" in 1/2" increments. 14-206: Pin to Pin range = 6-7/8" to 8-3/8" in 1/2" increments.
CUSTOM: pin-style-quick-release-lever
Shroud Adjusters & Extenders
-
Allen #A4372*1 Small Shroud Adjuster
$12.99 CAN -
Allen #HA-4272 Fine Stay Adjuster
$25.99 CAN -
Allen #HT4172 Stay Adjustor
$18.99 CAN -
Allen HA4772HT*1 HighLoad Stay Adjuster
$29.99 CAN -
Johnson Hardware #11-100 Stay Adjustor
$39.99 CAN -
Johnson Hardware #15-204-1 Shroud Adjuster
$35.99 CAN -
Johnson Hardware #15-212 Quick Release Lever
$60.99 CAN -
Johnson Hardware #16-204 1/4" Stay Extender
$20.99 CAN -
Johnson Hardware #16-205 5/16" Stay Extender
$33.99 CAN -
Johnson Hardware #16-206 3/8" Stay Extender
$54.99 CAN -
Johnson Hardware #16-208 1/2" Stay Extender
$65.99 CAN -
Johnson Hardware #49-250 Inner Stay Bridle
$359.99 CAN -
Johnson Hardware Pin Style Quick Release Lever
from $96.99 CAN -
Ronstan #RF2331 Stay Adjustor
$34.99 CAN -
Ronstan #RF47 8" X 1" Chainplate
$19.99 CAN -
RWO #R4550 Shroud Lever 254mm
$122.99 CAN