Marine Outfitters
While they last!
Save on Shipping
Currency: Canadian Pricing American Pricing


Boatlife Life-Seal

A unique combination of marine silicone & polyurethane formulated especially for fiberglass. LifeSeal offers a fast-curing, low odor, high adhesion formula which adheres to metal, glass, wood, Lexan, ABS and other plastics. Mildew resistant. Shelf life 12 months.

Usually Stocked Items normally ship immediately or in 1-2 business days. These items are returnable subject to our RETURN POLICY
Quick Access Items normally ship in 1-2 business days. Quick Access Items are returnable subject to our RETURN POLICY but with a restocking fee.
Special Order Items normally need a little extra time to be brought in from our suppliers � in some cases up to 7 business days. Special Orders are returnable subject to our RETURN POLICY but with a restocking fee.
Request Items may take a few days to obtain from our suppliers and pricing may need to be updated. Marine Outfitters will contact you to provide an approximate delivery date and confirmation of price. Request items cannot be returned!
 
Item / Price
Stock Type
Inventory On Hand 11/13 @ 07:18 AM
Product Code
Order Quantity
310mL Clear - #1169
$46.99
Usually Stocked Item
020537011690
310ml, Alum - #1172
$43.99
Quick Access
020537011720
310mL Black - #1171
$42.99
Usually Stocked Item
020537011713
310mL, White - #1170
$42.99
Usually Stocked Item
020537011706
80ml Clear - #1160
$24.99
Usually Stocked Item
020537011607
80mL White - #1161
$24.99
Quick Access
020537011614
80mL, Black - #1162
$24.99
Usually Stocked Item
020537011621


CUSTOM: boatlife-lifeseal


Currency: Canadian Pricing American Pricing


Sealants: Adhesive


With so many choices, which sealant is right for you? Why not just use silicone?

When you drill a hole through your boat's hull to attach hardware, plumbing fittings or electronic transducer (such as knotmeters), you are effectively breaching the waterproof shell that holds your boat afloat!

Holes are essentially a direct route for water to penetrate your boat's core material (the wood or foam sandwiched between the fibreglass layers of your hull) which can lead to catastrophic water damage. Even above the waterline, it is imperative that you seal every single hole with sealant - no matter how small!

Bonding with Adhesive Sealants

While many people refer to sealants as "silicone", a high performance sealant is rarely silicone-based.. so let's avoid getting them confused! We should state that while silicone still has its place in some places on a boat, it should never be used to bond hardware. Silicone is excellent for forming "gasket-like" seals, but provides very little actual adhesion between two surfaces. In other words, it fills the gap but that's about it.

When in doubt about which type of sealant to use, we recommend polyurethane-based sealants.

One important point to remember is the stronger a sealant is, generally the more difficult it is to remove! We recommend saving time and frustration by considering the Sealant Removers listed on our site.

Curing Sealants Underwater

Don't let your jaw drop; for the most part, adhesive sealants are moisture cured! In other words, they cure better underwater than above! Just double check the label to confirm.

Here's a simple guide to the common and best selling sealants. We have added a silicone sealant at the bottom for comparative purposes!

Product
Tack Free / Full Cure
Characteristics
UV Resistant Sealants
3M 4000 UV <2 hrs / 48 hrs
  • Firm, rubbery waterproof surface with superior UV
    resistance properties making this an ideal cosmetic sealant.
  • Sandable
  • Above & Below Waterline
  • Tensile Strength: 300 psi
  • Elongation before break: 800%
  • Conclusion: Use in areas where sealant will be exposed to direct sunlight (entire bead - not just the edges!), such as bonding clear materials like acrylic or polycarbonates.
Sikaflex 295-UV 60 min / 6-10 days
  • Similar UV resistant waterproof surface as 3M 4000 UV.
  • Sandable
  • Above & Below Waterline
  • Tensile Strength: 160 psi, Tear propogation: 725 psi
  • Elongation before break: > 300%
  • Conclusion: A great low-cost alternative to 3M 4000 UV
User-friendly Sealants (Easily Removed!)
3M 4200 1-2 hrs / 24-48 hrs
  • Approx. half the strength of 3M 5200, which allows for disassembly of parts
  • Sandable
  • Above & Below Waterline
  • Tensile Strength: 300 psi
  • Elongation before break: 900%
  • Conclusion: Use for bonding that does not require full strength and hardware which you know you will have to remove in the future!
Sikaflex 291 45 min / 7-14 days
  • Suitable for making elastic, vibration-resistant joint seals. Excellent adhesion to wood, metal, paint coatings, ceramics and plastics. Not suitable for flexible plastic such as polycarbonates or acrylics
  • Sandable
  • Above & Below Waterline
  • Tensile Strength: 260 psi, Tear propogation: 870 psi
  • Elongation before break: 500%
  • Conclusion: A lower cost alternative to 3M 4200.
Sikaflex 291-LOT 3-5 hrs / 7-14 days
  • LOT (Long Open Time) is similar to Sikaflex 291 with an extra long curing time, giving you more time to get your sealant applied before bonding the materials
  • Sandable
  • Above & Below Waterline
  • Tensile Strength: 120 psi. Tear propogation: 635 psi on gelcoat, 760 psi on fibreglass
  • Elongation before break: 700%
  • Conclusion: A great multipurpose sealant for jobs that need extra time to set up.
High Performance Sealants
3M 5200 48 hrs / 7-14 days
  • A high-performance polyurethane adhesive sealant with amazing adhesion. Requires 7-14 days for full cure.
  • Sandable
  • Above & Below Waterline
  • Tensile Strength: 700 psi
  • Elongation before break: 1350%
  • Conclusion: Use in applications which require full strength - and removal is not a concern!
3M 5200 Fast Cure 1-2 hrs / 24-48 hrs
  • High performance polyurethane with almost as much strength as 3M 5200 but much faster tack-free and cure time.
  • Sandable
  • Above & Below Waterline
  • Tensile Strength: 600 psi
  • Elongation before break: 925%
  • Conclusion: Use in applications which require full strength - and removal is not a concern!
Silicone-Polyurethane Hybrids & Polysulfides
BoatLife LifeSeal N/A / N/A
  • A unique combination of marine silicone and polyurethane, formulated especially for fiberglass. LifeSeal offers a fast-curing, low odor, high adhesion, non-sagging, non corrosive, non-yellowing formula. Will adhere to polycarbonate.
  • Above & Below Waterline
  • Properties: Not available
  • Conclusion: Since it can be removed from gelcoat without damaging its surface, perhaps best used in delicate situations where the strength of polyurethane is needed but surface must be safe from damage.
BoatLife LifeCalk 1-3 days / N/A
  • A long lasting, permanently flexible marine polysulfide sealant that bonds to fiberglass, wood, metal, glass, and itself.
  • Sandable, paintable
  • Above & Below Waterline
  • Properties: Not available
  • Conclusion: Cures to a firm flexible rubber seal with excellent waterproofing and adhesion qualities.
Silicone Sealants
3M Silicone Sealant 20 min / 24-48 hrs
  • A mildew resistant non-sagging, moisture curing silicone rubber sealant.
  • Not Sandable
  • Above Waterline only
  • Tensile Strength: 220 psi
  • Elongation before break: 350%
  • Conclusion: Ideal for head sealing applications. Also excellent gasket adhesive and formed-in-place gasket material.

Theoretical Coverage Charts for Adhesive Sealant Products

Given the desired diameter of a bead or the dimensions of a seam, the coverage obtained from a cartridge or flex pack can be looked up in the following charts. Note that the values are calculated for "no waste." The actual coverage will be based on application technique and overfill.

Area Coverage

Should it be necessary to cover an area with the adhesive sealant, the material should be dispensed from the container and spread with a trowel. Most trowels for spreading adhesives will have a notched edge to facilitate control of the thickness being applied. When the notch depth is known or can be measured the coverage area can be determined from the following tables. Should it be necessary to apply a solid layer of a specific thickness, take the value given in the following table and divide the area by two.

Information provided by 3M.